How is the automatic poultry equipment manure cleaner maintained

Automatic poultry equipment has become the majority of poultry farmers to carry out breeding projects necessary. Especially the use of automated dung removal systems. Provides a clean and fresh environment for the chicken coop. So how should the manure cleaning machine be maintained? Chicken cage manufacturers today for you to explain.

 

 

1, When the manure cleaning belt of the manure cleaning machine is close to the edge of the passive roller at the head end by 10mm. It can be adjusted by tightening the bolts on the tension rod. Loosen bolts properly when the manure belt has moved back one third. To prevent the manure removal from running too far.

2, When the manure cleaning belt runs sideways close to the edge of the passive roller. You can release the tightening chain and move the manure belt to the middle of the passive roller by hand. Install the tightening chain on the sprocket. Then tighten the six-edge shaft with pipe tongs until it can not move, tighten the bolts on the tightening rod.

3, After being used for a period of time, the waste cleaning belt will be prolonged and loose. You have to cut off a section and re-weld it. Be sure to buy an ultrasonic plastic welder. When welding, both ends should be aligned, not deflected.

4, The tail deviation is relatively rare, the main reason is that the rubber roller is not tight. If it runs off, it can be adjusted by adjusting the tightness of the bolts at the outer end, and then press the rubber roller. If the belt is rolled, press the rubber roller after adjusting the bolt, and then use a stick to spread and smooth the excrement cleaning belt in front of the big roller in the process of running. The problem of the belt is naturally solved when running again.

5, If the manure cleaning machine has the situation of rolling belt, just spread the manure cleaning belt in the part of the passive roller, and adjust the main machine to tighten the wire. Never cut.

 

On is chicken cage manufacturers through five ways to explain how to clean up automated poultry equipment in the manure machine.