Nowadays, almost all farmers are inseparable from automatic chicken raising equipment. They are not only a good helper for farmers, but also provide a comfortable environment for chickens. The current automated chicken breeding equipment is very mechanized. Farmers no longer need to stay by the chicken house at all times. The equipment can realize automatic feeding, water supply, manure removal, egg collection, ventilation and so on. This is very convenient, so how should these equipment be maintained? Today we will talk about.
Automatic chicken feeding equipment In daily use, the automatic chicken feeding line must pay attention to the following points:
- When the feeder is in use, farmers must pay attention to the fact that nothing can be placed on the feeder, otherwise it may cause the motor to bear excessive pressure and burn the motor.
- After raising a batch of chickens, add butter to the motor shaft of the chicken feed line for maintenance. The motor bucket can drip a few drops of vegetable oil to prevent rust.
- After raising a batch of chickens, check the buckle of the feed line and the screw fastening of the lifting system and other places.
- The line switch and contact of the material line control, check if there is any looseness to prevent poor contact
There is also the phenomenon that the manure removal belt will be prolonged and loosened after the farmer uses the manure cleaner for a period of time. If this phenomenon occurs, the farmer needs to cut off a section and re-weld it. The farmer should check the bearings and rubber rollers regularly. The bearings should be added with butter regularly, and the rubber rollers should be kept tightly pressed and not loosened. In addition, many farmers’ manure removal opportunities have a roll-up condition. Farmers can spread the manure removal belt on the passive roller and spread it flat.
The above is the knowledge of poultry chicken farming equipment supplier to share with you about the maintenance of chicken farming equipment. I hope that farmers can make full use of the above information, maintain the equipment, and make their service life longer.